H-600R T-Type, H-600 In-Line Filters and VEP Vent Protector

H-600R T-Type, H-600 In-Line Filters and VEP Vent Protector

The H-600R Series is a T-type filtration device, which will protect system components from fluid particles and contaminants. The H-600R provides easy on-line maintenance without disassembling it from the system.
  • Bar Stock 316 St.St. or Brass Construction
  • On-line Maintenance
  • High-Pressure Characteristics 6000 psi (413 bar) in 316St.St. and 2000 psi (137 bar) in brass
  • HAM-LET LET-LOK® Ends, Male & Female NPT, and HTC® Face Seal
  • Replaceable sintered filtration elements are available in 0.1, 0.5, 2, 7, 15, 40, 60, 90, μm.
  • Replaceable strainer filtration elements are available in 140, 230, 440μm
  • ECE R110 Approved for the CNG / NGV as an option
The H-600 Series is an In-Line filtration device. It will be installed in a system to protect the system components from fluid particles and contaminants.
  • Bar Stock 316St.St. or Brass Construction
  • Moderate Pressure Characteristics 3000 psi (206 bar) in 316 St.St. and 1000 psi (68 bar) in Brass
  • HAM-LET LET-LOK® Ends, Male & Female NPT, and HTC® Face-Seal Bead
  • Replaceable sintered filtration elements are available in 0.1, 0.5, 2, 7, 15, 40, 60, 90, μm.
  • Replaceable strainer filtration elements are available in 140, 230, 440μm.
The Vent Protector Fitting (VEP) is used to protect tubes that are exposed to atmospheric pressure, instruments that are open to atmospheric pressure and every tube outlet that is open to atmospheric pressure.

Lifetime Warranty

One of the most commonly asked question we hear from potential customers is:-

“Are your tube fittings Interchangeable and intermixable with Swagelok, Hoke Gyrolok, Parker A-lok etc”.

We are so confident that our components are manufactured to the same exacting standards and tolerances that we also provide a limited lifetime warranty to eradicate the misleading claims that components cannot be intermixed.

For additional information, test reports and actual “hands on demonstrations” please contact us to find out more.

HAM-LET Compression Fittings Official Distributor

As a result of extensive testing and evaluations by HAM-LET and from the many thousands of satisfied customers around the world who have chosen our products for SAFETY, RELIABILITY and PERFORMANCE, HAM-LET hereby warrants all products to be free from defects in material and workmanship.

This warranty shall also extend to the intermixing of components manufactured by several American organisations such as Swagelok, Hoke, Parker and HAM-LET products.

The manufacture shall be liable only if the product is used as specified in the current catalogues and written instructions.

The purchaser’s remedies shall be limited to replacement and installation of any parts that fail through a defect in material or workmanship.  Manufacture specifically disavows any other representation, expressed or implied, warranty, or liability relating to the condition or use of the product.

 

H-600 T-Type and In-Line Filters

Full Product Information
Make Enquiry
Maintenance Manual