Let-Lok Compression Tube Fittings
Let-Lok Compression Tube Fittings
The HAM-LET GROUP has produced high quality tube and pipe fittings in various materials for high-pressure applications since its establishment in 1950.
As a result of tremendous efforts in research and development during the last five decades, HAM-LET has gained an excellent reputation as a leading manufacturer of high-pressure instrumentation products.
The LET-LOK® range of connectors has been developed to fill the rapidly increasing demand for tube fittings suitable for high-pressure use in environments such as petrochemical, fluid, power, nuclear, electronic, as well as other major industrial settings.
LET-LOK® tube fittings have been carefully manufactured to withstand the persistent demands for high-performance tube fittings. Each one has passed a stringent tolerance test for high pressure, impulse, vibration, vacuum and temperature. These precision-machined fittings are manufactured to exacting standards, employing the most modern state-of-the-art computerized automation. All LET-LOK® fittings are backed by HAM-LET‘s commitment to the highest
quality-control standards and skilled craftsmanship.
How does LET-LOK® work?
The LET-LOK® tube fitting is a mechanism used both to seal and to grip tubing. The mechanical advantage and geometry of this kind of fitting produces a leak-tight assembly.
To assemble, simply insert the tube into the complete assembly until the tube bottoms out against the shoulder of the fitting body (1). The two ferrules are driven forward between the nut (4) and fitting body using the mechanical force created by rotating the nut clockwise. The back ferrule (3) is driven against the tapered rear of the front ferrule (2) and the front ferrule is driven by force into the tapered mouth of the body. The rear ferrule is swaged radially inwards on the tube while lifting the front ferrule out to form a full-faced seal on the tapered surface of the body.
The 1 and 1/4 turn of the nut from the hand-tight position assures consistent drive of the sealing members. This ensures an effective seal against high-pressure as well as ultra high-vacuum conditions.
One of the most commonly asked question we hear from potential customers is:-
“Are your tube fittings Interchangeable and intermixable with Swagelok, Hoke Gyrolok, Parker A-lok etc”.
We are so confident that our components are manufactured to the same exacting standards and tolerances that we also provide a limited lifetime warranty to eradicate the misleading claims that components cannot be intermixed.
For additional information, test reports and actual “hands on demonstrations” please contact us to find out more.
As a result of extensive testing and evaluations by HAM-LET and from the many thousands of satisfied customers around the world who have chosen our products for SAFETY, RELIABILITY and PERFORMANCE, HAM-LET hereby warrants all products to be free from defects in material and workmanship.
This warranty shall also extend to the intermixing of components manufactured by several American organisations such as Swagelok, Hoke, Parker and HAM-LET products.
The manufacture shall be liable only if the product is used as specified in the current catalogues and written instructions.
The purchaser’s remedies shall be limited to replacement and installation of any parts that fail through a defect in material or workmanship. Manufacture specifically disavows any other representation, expressed or implied, warranty, or liability relating to the condition or use of the product.