H-900 and H-900HP Relief Valves

H-900 and H-900HP Relief Valves

The H-900 series is a relief valve designed for low pressure services. It is most suited for use where changes in pressure can cause process issues, system damage or personal injury.
  • St.St. 316 Construction
  • Service 10-225 psi
  • MAWP 300 psi
  • One spring for all set pressure range
  • Available in all pipe threads and LET-LOK® connections
  • Option to comply with standards CE/PED
  • End connections: 1/4″,1/2″,6mm and 12mm
The H-900 HP Series is a relief valve designed for high pressure services. It is most suited for use where changes in pressure can cause process issues, system damage or personal injury.
  • St.St. 316 Construction
  • MAWT up to 6000 psi
  • Set Pressure from 50 psig to 6000 psig ( 3.50 to 414 bar)
  • Identifying colored springs for each pressure range
  • Replaceable springs for variable pressure ranges
  • Available in all pipe threads and LET-LOK® connections
  • Option to comply with standards CE/PED
  • Sizes range: 1/4″,1/2″, 6mm and 12mm

Lifetime Warranty

One of the most commonly asked question we hear from potential customers is:-

“Are your tube fittings Interchangeable and intermixable with Swagelok, Hoke Gyrolok, Parker A-lok etc”.

We are so confident that our components are manufactured to the same exacting standards and tolerances that we also provide a limited lifetime warranty to eradicate the misleading claims that components cannot be intermixed.

For additional information, test reports and actual “hands on demonstrations” please contact us to find out more.

HAM-LET Compression Fittings Official Distributor

As a result of extensive testing and evaluations by HAM-LET and from the many thousands of satisfied customers around the world who have chosen our products for SAFETY, RELIABILITY and PERFORMANCE, HAM-LET hereby warrants all products to be free from defects in material and workmanship.

This warranty shall also extend to the intermixing of components manufactured by several American organisations such as Swagelok, Hoke, Parker and HAM-LET products.

The manufacture shall be liable only if the product is used as specified in the current catalogues and written instructions.

The purchaser’s remedies shall be limited to replacement and installation of any parts that fail through a defect in material or workmanship.  Manufacture specifically disavows any other representation, expressed or implied, warranty, or liability relating to the condition or use of the product.

 

H-900 Relief Valves HAM-LET

Full Product Information
Make Enquiry
Maintenance Manual