MBV Metering Ball Valves

MBV Metering Ball Valves

The Shut-off Metering Ball Valve Series provides the highest degree of precision metering for moderate pressure applications. This series features innovative and unique shut-off capability and allows full control of the process from complete shut-off to extra fine regulation. A choice of three precision stem tapers enables metering at flow capacities as low as CV= 0.001 with up to 11 handle turns. This valve is the ultimate solution for precision flow control.
  • On/Off and Metering service
  • PFA Encapsulated Ball Stem design
  • Panel Mounting as standard
  • MAWP 2000 psi (137 Barg)
  • MAWT 300°F (150°C)
  • End Connections: LET-LOK 1/16”, 1/8”, 1/4”, 3/8”; FNPT 1/8”; MNPT 1/8”; Male Face Seal 1/4”
  • 1°, 3° and 5° Stem Taper for required flow control
  • Stem with Stopper shoulder for long life service

Lifetime Warranty

One of the most commonly asked question we hear from potential customers is:-

“Are your tube fittings Interchangeable and intermixable with Swagelok, Hoke Gyrolok, Parker A-lok etc”.

We are so confident that our components are manufactured to the same exacting standards and tolerances that we also provide a limited lifetime warranty to eradicate the misleading claims that components cannot be intermixed.

For additional information, test reports and actual “hands on demonstrations” please contact us to find out more.

HAM-LET Compression Fittings Official Distributor

As a result of extensive testing and evaluations by HAM-LET and from the many thousands of satisfied customers around the world who have chosen our products for SAFETY, RELIABILITY and PERFORMANCE, HAM-LET hereby warrants all products to be free from defects in material and workmanship.

This warranty shall also extend to the intermixing of components manufactured by several American organisations such as Swagelok, Hoke, Parker and HAM-LET products.

The manufacture shall be liable only if the product is used as specified in the current catalogues and written instructions.

The purchaser’s remedies shall be limited to replacement and installation of any parts that fail through a defect in material or workmanship.  Manufacture specifically disavows any other representation, expressed or implied, warranty, or liability relating to the condition or use of the product.

 

MBV Metering Ball Valves HAM-LET

Full Product Information
Make Enquiry